تامین کننده سیم و کابل حرفه ای
تلفن: 86-13855514957 پست الکترونیک: greatsteelwirecable@yahoo.com
Place of Origin: | Anhui,China |
نام تجاری: | Litong Global |
گواهی: | ISO9001-2008 |
Model Number: | LT-160325 |
Minimum Order Quantity: | Negotiable |
---|---|
قیمت: | Negotiable |
Packaging Details: | In Coil |
Delivery Time: | 10-15days after confirmed order |
Payment Terms: | TT/LC |
Supply Ability: | 400tons/day |
Steel Grade: | Low&Middle and High Carbon Wire Rod | Wire Gauge: | 1.0-4.8mm |
---|---|---|---|
Type: | Galvanized | Alloy Or Not: | Non-alloy |
Special Use: | Cold Heading Steel | Application: | Chain Link Fence |
Standard: | AISI|ASTM|BS|DIN|GB|JIS | ||
برجسته: | galvanised steel wire,hot dip galvanized steel wire |
Galvanized steel wire for chain link
Galvanized steel wire for chain link is a soft, heavily Zinc coated wire used in the chain link, gabion and various kinds of mesh industry protection.
Low carbon galvanized wire for chain link are produced to meet the requirements of BS EN 10244; ASTM_A_641(zinc-coated) etc. The specification can be made by customer's requirement.
The diameter of the wire is available from 1.7mm to 8.0mm and is available in either coils or stems.
Wire Specifications
Diameter Tolerances
Nominal Wire Diameter |
Tolerance (mm) |
over 0.80mm up to and incl. 1.60mm over 1.60mm up to and incl. 2.50mm over 2.50mm up to and incl. 4.00mm over 4.00mm up to and incl. 5.00mm over 5.00mm up to and incl. 8.00mm |
+/-0.03 +/-0.03 +/-0.03 +/-0.04 +/-0.04 |
Galvanised Coating Weight - AS3863; EN 10244; ASTM A 641
Wire Diameter (mm) |
Wire Diameter (inch) |
Minimum Ctg Mass Class 1 (g/m2) | Minimum Ctg Mass Class 2 (g/m2) | Minimum Ctg Mass Class 3 (g/m2) |
2.41 | 0.095 | 90 | 245 | 365 |
2.68 | 0.106 | 90 | 245 | 365 |
2.74 | 0.108 | 90 | 245 | 365 |
2.79 | 0.110 | 90 | 245 | 365 |
3.38 | 0.133 | 90 | 245 | 365 |
3.4 | 0.134 | 90 | 245 | 365 |
3.68 | 0.145 | 90 | 245 | 365 |
Tensile Strength (MPa)
The tensile strength is defined as the maximum load achieved in a tensile test divided by the cross sectional area of the wire test piece. The tensile strength range for Armouring Wire is 448-517 MPa; 551-620 MPa; 65000psi~75000psi;80000psi~90000psi
تماس با شخص: nancy